DIY Z-Wave Pool Controller

Credit to WaterHeaterTimer.org for the guidelines on putting this together.

• Qty 2 Z-Wave Light Switch (Jasco or similar)
• Packard C240B Contactor 2 Pole 40 Amps 120 Coil Voltage
• Schneider Electric 199Ax-4 Open Power Relay, 5 Pin, 120Vac
• Enough 10 gauge white/black/red/green wire to hook it all up
• 1/2 inch Liquid Tight conduit and fittings
• Altelix 13x10x5 PC+ABS Weatherproof Utility Box NEMA Enclosure
• Medium depth 2-gang electrical box
• 2-Switch face plate